
Zoll X Series Advanced Defibrillator Monitor - Refurbished & Recertified
ZOLL X Series Advanced Monitor/Defibrillator - Refurbished
SERVICE AND CALIBRATION:
Professionally refurbished, serviced, and calibrated by our qualified in-house biomedical technicians.
Each unit undergoes a comprehensive performance inspection and is prepared for patient use prior to shipment.
Includes:
- 12-Month Warranty
- Certified BioMed Equipment Diagnostic Report
- Printed Order Sheet Identifying the ZOLL X Series Advanced and Serial Number of the Unit Shipped
Standard Configuration Includes:
Defibrillation and Therapy
- Manual Defibrillation (up to 200J ZOLL Rectilinear Biphasic™)
- AED Mode
- Real CPR Help® with CPR Dashboard™ (real-time compression depth, rate, and release feedback)
- Noninvasive Transcutaneous Pacing
- Synchronized Cardioversion
- See-Thru CPR® (helps display the underlying ECG rhythm during active chest compressions)
Monitoring and Clinical Support
- 3-Lead and 12-Lead ECG Monitoring
- 12-Lead Interpretive Analysis
- Real BVM Help® Ventilation Feedback
- TBI Dashboard™
- Pulse Oximetry (SpO₂), Masimo
- Noninvasive Blood Pressure (NIBP)
- End-Tidal CO₂ Capnography (EtCO₂), Microstream®
Included With Every Unit:
- 12-Lead ECG Cable
- NIBP Hose
- NIBP Adult Cuff
- SpO₂ Sensor
- SpO₂ Adapter Cable
- Multifunction Therapy Cable
- Adult Multifunction Pads
- Printer Paper
- EtCO₂ Sampling Line
- Battery
- ECG Electrodes
- Carrying Case
Accessories May Be Pre-Owned And Are Inspected, Sanitized And Fully Functional.
Specifications:
| Physical | |
|---|---|
| Weight | 10.6 lb (4.8 kg) without battery and paper / 11.7 lb (5.3 kg) with battery and paper |
| Dimensions (H x W x D) | 8.9 x 10.4 x 7.9 in (22.6 x 26.4 x 20.1 cm) |
| Display | 6.5 in (16.56 cm) diagonal color LCD, 640 x 480 pixels |
| Patient Modes | Adult, Pediatric and Neonate. Patient mode automatically applies configurable defaults for alarm limits, defibrillation energy and NIBP settings |
| Defibrillator | |
| Waveform | ZOLL Rectilinear Biphasic™ |
| Energy Range | 1 to 200 joules with 19 selectable energy settings |
| Charge Time | Less than 7 seconds with a new, fully charged battery |
| Synchronized Cardioversion | Synchronizes the defibrillator pulse to the patient's R wave |
| RapidShock™ | Shock/No Shock decision with device pre-charge in approximately 4 to 5 seconds when used in Adult Mode with authorized ZOLL CPR electrodes |
| Pacer | |
| Type | External transcutaneous, constant-current pacing |
| Modes | Demand and Fixed |
| Rate | 30 to 180 bpm |
| Output Current | 0 to 140 mA |
| Real-Time Clinical Feedback | |
| Real CPR Help® / CPR Dashboard™ | Real-time chest compression depth and rate feedback with release indicator and Perfusion Performance Indicator (PPI) |
| See-Thru CPR® | Filters chest compression artifact to help display the underlying ECG rhythm during CPR |
| Real BVM Help® | Provides real-time ventilation feedback including ventilation rate and tidal volume |
| TBI Dashboard™ | Graphical trending of SpO₂, systolic blood pressure and EtCO₂ to support traumatic brain injury monitoring |
| Monitoring | |
| ECG Leads | Automatic detection of 3-lead, 5-lead and 12-lead ECG cables. Leads I, II, III, aVR, aVL, aVF and V1-V6 |
| Heart Rate Range | 30 to 300 bpm |
| SpO₂ | Masimo® SET. Oxygen saturation range 0 to 100%. Pulse rate range 25 to 240 bpm |
| NIBP | Smartcuf® and Sure BP® technology. Displays systolic, diastolic and mean pressure. Automatic intervals from 1 to 60 minutes plus manual measurements |
| NIBP Pressure Range | Systolic 20 to 260 mmHg, diastolic 10 to 220 mmHg, mean 13 to 230 mmHg |
| EtCO₂ | Microstream® capnography. Measurement range 0 to 150 mmHg with respiration rate from 0 to 149 breaths/min |
| EtCO₂ Response Time | 2.9 seconds typical / 3.9 seconds maximum |
| Printer and Data | |
| Printer | High-resolution thermal printer using 80 mm paper. 25 or 50 mm/sec paper speed. Can print up to 3 waveforms |
| Trend Data | Up to 24 hours of trend data at 1-minute intervals |
| Memory | Stores a combination of 24 hours of trends, up to 500 non-ECG events and 32 monitor, defibrillator, pacer and treatment snapshots |
| Power | |
| Battery | Rechargeable lithium-ion, 11.1 VDC, 6.6 Ah, 73 Wh |
| Run Time (manufacturer specification, with a new, fully charged battery) | At least 7 hours of continuous 3/5-lead ECG monitoring at room temperature, or at least 300 defibrillator discharges at the maximum 200J energy setting. Actual run time depends on battery condition, display settings and device usage. |
| Environmental | |
| Operating Temperature | 32° to 122°F (0° to 50°C) |
| Water / Dust Resistance | IEC 60529 IP5X dust protection and IPX5 water protection |
| Drop Rating | 76.2 cm (30 in) functional drop per EN 1789; tested at 2 metres per IEC 60601-1 |
| Vibration | Tested to EN 1789 ambulance requirements and RTCA/DO-160G helicopter vibration profiles |
For questions about fit or condition, call 800-282-9352 or email sales@jjjmedical.com with your model and a photo.
Shipping. In-stock parts and supplies ship by ground. Recertified units ship in 2–3 weeks after recertification and final testing, by freight, with the freight cost quoted at checkout. We ship across the US and Canada; other countries by quote.
Payment. Card, purchase order, wire or check. Financing Available.
Returns. Contact us within 7 days of delivery to start a return. Returns are reviewed individually and a restocking fee may apply. We will issue an authorization number and instructions before any item is returned. Full Return Policy.

